Refleks Marine Heater 2000K & KV Configuration

1.465,63

This model is the most popular because this stove already has a window as standard, the controller is situated backwards and with 3.62 kW heat output, this all-rounder fits in almost any situation.

In addition, this stove (KV) has the possibility of being connected to a hot water system. The water is heated in two semi-circular stainless-steel tanks and the heated water is piped to your central heating and/or hot water boiler.

With this configuration, you can order the 2000K(V) with the essential and recommended parts. You can make your own selection and add it to your shopping cart with one click.

This item: Refleks Marine Heater 2000K & KV Configuration
1.465,63
1.465,63
424,12
70,81
78,75
67,32
1 × 90mm Pipe
Length
33,34108,30
140,68
1 × 90mm Protect Cap
Length
97,82132,43
1 × 90 mm Deck Flange Ø180 mm
Model
101,30137,81
22,26
1 × 90/114mm Insulated Pipe
Length
89,57304,88
53,99
1 × 90mm Downdraft Cap
Model
137,19221,37
42,42
1 × Stainless Steel Fuel Tank
Size
338,99460,04
44,04
1 × Hüco Fuel Pump
Model
126,97154,28
79,69
10,52
SKU: 10R2000K-1

Description

2000K model

  • Generates 3.62 kW and fits well in rooms of 40 to 70 m3.
  • Consumption 0.18 to 0.54 litres per hour.
  • No electricity required.
  • Flue diameter 90mm.
  • Recommended flue length is 1.40 metres without bends, inside.
    The required length of the chimney depends on many circumstances. The weather outside, where the wind is blowing from, is the chimney clear all round, pilot light or full. Basically, the longer the flue, the more weather conditions will allow the stove to burn well. The length advised here is good for about 80-90% of the different weather conditions. An extension of the chimney outside is very well possible too with an insulated pipe.. If you would like to assess your specific situation, please contact us.
  • A draught stabiliser is recommended, on one hand to compensate for wind penetration and on the other hand to influence the draught in the chimney.
  • A permanent supply of fresh air is required.
  • Provides dry warm air and expels condensation.
  • Average lifespan 30 years.

2000KV model

  • Generates 1.5 kW of air heating and 2.7 kW of water heating and fits well in rooms of 40 to 70 m3.
  • Consumption 0.18 to 0.54 litres per hour.
  • No electricity required.
  • Flue diameter 90mm
  • Recommended flue length is 1.40 metres without bends, inside.
    The required length of the chimney depends on many circumstances. The weather outside, where the wind is blowing from, is the chimney clear all round, pilot light or full. Basically, the longer the flue, the more weather conditions will allow the stove to burn well. The length advised here is good for about 80-90% of the different weather conditions. An extension of the chimney outside is very well possible too with an insulated pipe.. If you would like to assess your specific situation, please contact us.
  • A draught stabiliser is recommended, on one hand to compensate for wind penetration and on the other hand to influence the draught in the chimney.
  • A permanent supply of fresh air is required.
  • Provides dry warm air and expels condensation.
  • Average service life 30 years.

Additional information

Dimensions
Height

Diameter

Weight

Fuel consumption / hour
Min. (Liter)

Max. (Liter)

Heat
Capacity air heating

Max. m³ without insulating

Max. m³ with insulating