Refleks Marine Heater 2000KV (Water)

€1.889,75

This stove is similar to the 2000K, but it has a unique hot water supply. Normally, a spiral copper pipe runs along the inner wall of a Reflek’s stove. With the 2000KV, two semi-circular stainless-steel tanks are mounted. The heated water is led through pipes (left side of the stove) to your central heating and/or hot water boiler.

Next providing an unobstructed view of the fire, these water tanks do not suffer from the heat when not in use. So, if you don’t want to use the hot water option at first, this stove is already prepared for later installation.

SKU: 10R2000KV

Description

  • Generates 1.5 kW of air heating and 2.7 kW of water heating and fits well in rooms of 40 to 70 m3.
  • Consumption 0.18 to 0.54 litres per hour.
  • No electricity required.
  • Flue diameter 90mm
  • Recommended flue length is 1.40 metres without bends, inside.
    The required length of the chimney depends on many circumstances. The weather outside, where the wind is blowing from, is the chimney clear all round, pilot light or full. Basically, the longer the flue, the more weather conditions will allow the stove to burn well. The length advised here is good for about 80-90% of the different weather conditions. An extension of the chimney outside is very well possible too with an insulated pipe.. If you would like to assess your specific situation, please contact us.
  • A draught stabiliser is recommended, on one hand to compensate for wind penetration and on the other hand to influence the draught in the chimney.
  • A permanent supply of fresh air is required.
  • Provides dry warm air and expels condensation.
  • Average service life 30 years.

Additional information

Dimensions
Height

Diameter

Weight

Fuel consumption / hour
Min. (Liter)

Max. (Liter)

Heat
Capacity air heating

Capacity radiator heating

Max. m³ without insulating

Max. m³ with insulating

Related products