Refleks Marine Heater 61MS

1.612,27

Practically the same size as the 60M stove, only this one is equipped as standard with a spiral water pipe in the stove for hot water for radiators elsewhere in your boat. The direct air heating is 1.6 kW but the water heating is no less than 3.4 kW.

This stove cannot be combined with a glass window.

This item: Refleks Marine Heater 61MS
1.612,27
1.612,27
131,09
119,34
SKU: 1061MS

Description

  • Generates a maximum of 1.6 kW air heating and 3.4 kW water heating. Fits well in rooms from 50 to 83 m3.
  • Consumption 0.18 to 0.80 litres per hour.
  • No power required.
  • Flue diameter 90mm.
  • Recommended flue length is 1,60 meter without bends, inside.
    The required length of the chimney depends on many circumstances. The weather outside, where the wind is blowing from, is the chimney clear all round, pilot light or full. Basically, the longer the flue, the more weather conditions will allow the stove to burn well. The length advised here is good for about 80-90% of the different weather conditions. An extension of the chimney outside is very well possible too with an insulated pipe.. If you would like to assess your specific situation, please contact us.
  • A draught stabilizer is recommended, on one hand to compensate for wind penetration and on the other hand to influence the draught in the chimney.
  • A permanent supply of fresh air is required.
  • Provides dry warm air and expels condensation.
  • Average service life 30 years.

Additional information

Dimensions
Height

Diameter

Weight

Fuel consumption / hour
Min. (Liter)

Max. (Liter)

Heat
Capacity air heating

Capacity radiator heating

Max. m³ without insulating

Max. m³ with insulating